Order Products : sales@su-jiao.com
Qenos PE HD0840
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Qenos PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C5dQmu_Qenos-PE-HD0840.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HD0840 is a very high molecular weight High Density Polyethylene copolymer resin, especially formulated for use in large part mouldings where strength and rigidity are of importance. It combines excellent impact strength with good ESCR. HD0840 is especially suited for blow moulding drums from 15L to 220L and supported IBC's to 1000L in volume. HD0840 is also suitable for Dangerous Goods (DG) applications - depending on the design of the container, the goods to be stored and the DG grouping. Suitability for use in any application should be determined by appropriate performance testing. For outdoor applications, an appropriate UV stabilization package should be added. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.060 | g/10 min | |
| 190°C/21.6 kg | 7.0 | g/10 min | |
| 190°C/5.0 kg | 0.30 | g/10 min | |
| Environmental Stress-Cracking Resistance | ASTM D1693B | ||
| 10% Igepal, Compression Molded, F50 | 250 | hr | |
| 100% Igepal, Compression Molded, F50 | > 1000 | hr |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 26.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 900 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 960 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-30°C, Compression Molded) | 310 | J/m | ASTM D256A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silplus® 30 AS | Momentive Performance Materials Inc. | Silicone Rubber, HTV | Silplus® |
| TRILAC® ABS-HS5500 | Polymer Technology and Services, LLC | ABS | TRILAC® |
| DILAMID® 66 FV 15 NATURAL | Dilaplast S.p.A. | Nylon 66 | DILAMID® |
| LNP™ THERMOCOMP™ RB00A compound | SABIC Innovative Plastics Europe | Nylon 66 | LNP™ THERMOCOMP™ |
| Mediprene® 500602M | ELASTO | SEBS | Mediprene® |
