Order Products : sales@su-jiao.com
AA-Recoplast A1H1
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Smart Kemi SIA |
| Trademark: | AA-Recoplast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C5Uiba_AA-Recoplast-A1H1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AA-Recoplast designed to offer excellent stiffness, low warping, good/acceptable toughness, and good moldability (extrudability). This resin is idealy suited for injection molded crates, cases, trays, tote, bins and other objects requiring high rigidity. AA-Recoplast grades compiles with Food Contact Regulation upon request. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Apparent Density | 0.51 | g/cm³ | ISO 60 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.20 | g/10 min | |
| 190°C/21.6 kg | 60 | g/10 min | |
| 190°C/5.0 kg | 5.0 | g/10 min | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.010 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore A | 90 | ||
| Shore D | 56 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | > 1500 | MPa | ISO 527-2 |
| Tensile Stress (Break) | > 48.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 16 | % | ISO 527-2 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Odor - 15 estimators | 1.00 | points | EN 13752 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 to 190 | °C | |
| Middle Temperature | 180 to 190 | °C | |
| Front Temperature | 180 to 190 | °C | |
| Nozzle Temperature | 180 to 190 | °C | |
| Processing (Melt) Temp | 190 to 250 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MIDILENA III PPJ800 | ROMPETROL PETROCHEMICALS S.R.L. | PP Homopolymer | MIDILENA III |
| Forprene® 6NM001A60 | SO.F.TER. SPA | TPV | Forprene® |
| Laprene® 83FM9ZA35 | SO.F.TER. SPA | SEBS | Laprene® |
| Kareline® PLMS7525 | Plasthill Oy | PLA | Kareline® |
| Moplen EP649N | LyondellBasell Industries | PP Impact Copolymer | Moplen |
