Order Products : sales@su-jiao.com
LNP™ THERMOCOMP™ LF008 compound
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ THERMOCOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C4kQ9B_LNPTHERMOCOMPLF008compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP THERMOCOMP LF008 is a compound based on Polyetheretherketone resin containing Glass Fiber. Also known as: LNP* THERMOCOMP* Compound LF-1008 Product reorder name: LF008 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.61 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | |||
| Flow : 24 hours | 0.50 - 0.70 | % | ASTM D955 |
| Transverse flow : 24 hours | 1.0 - 3.0 | % | ASTM D955 |
| Vertical flow direction : 24 hours | 1.1 | % | ISO 294-4 |
| Flow direction : 24 hours | 6.4 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 13800 | MPa | ASTM D638 |
| -- | 12800 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Yield | 2.07 | MPa | ASTM D638 |
| Yield | 156 | MPa | ISO 527-2 |
| Fracture | 154 | MPa | ASTM D638 |
| Fracture | 155 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Yield | 2.4 | % | ASTM D638 |
| Yield | 2.3 | % | ISO 527-2 |
| Fracture | 2.4 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | |||
| -- | 9650 | MPa | ASTM D790 |
| -- | 10400 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 234 | MPa | ASTM D790 |
| -- | 240 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 69 | J/m | ASTM D256 |
| 23°C 2 | 7.6 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 810 | J/m | ASTM D4812 |
| 23°C 3 | 54 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Energy at Peak Load | 13.6 | J | ASTM D3763 |
| -- | 3.68 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 4(1.8 MPa, Unannealed, 64.0 mm Span) | 261 | °C | ISO 75-2/Af |
| Linear thermal expansion coefficient | |||
| Flow : -40 to 40°C | 3.6E-6 | cm/cm/°C | ASTM E831 |
| Flow : -40 to 40°C | 4.0E-6 | cm/cm/°C | ISO 11359-2 |
| Lateral : -40 to 40°C | 1.8E-6 | cm/cm/°C | ASTM E831 |
| Lateral : -40 to 40°C | 2.0E-6 | cm/cm/°C | ISO 11359-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 - 149 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 349 - 360 | °C | |
| Middle Temperature | 366 - 377 | °C | |
| Front Temperature | 382 - 393 | °C | |
| Processing (Melt) Temp | 382 - 388 | °C | |
| Mold Temperature | 138 - 166 | °C | |
| Back Pressure | 0.344 - 0.689 | MPa | |
| Screw Speed | 60 - 100 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 80*10*4 |
| 3 . | 80*10*4 |
| 4 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Scolefin 53 H 10-81 | Ravago Group | PP Homopolymer | Scolefin |
| SCANTEC PC S75R GF10 | Polykemi AB | PC | SCANTEC |
| Sylvin 8462-80 Natural | Sylvin Technologies Incorporated | PVC Alloy | Sylvin |
| KOCETAL® WR301GR | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| IROGRAN® A 75 P 4655 N | Huntsman Corporation | TPU-Polyether | IROGRAN® |
