Order Products : sales@su-jiao.com

ISPLEN® PP 050 Y1E

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	C4k5ex_ISPLEN-PP-050-Y1E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PP 050 Y1E is a medium melt flow rate polypropylene homopolymer with a molecular weight distribution which provides optimum balance between processing and mechanical properties in the latest generation staple fiber lines. It includes a specific formulation resistant to "gas fading" coloration, suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS Specially recommended for staple fibre and multifilament extrusion in high speed equipment. Suitable for tapes and monofilament Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PP 050 Y1E is a medium melt flow rate polypropylene homopolymer with a molecular weight distribution which provides optimum balance between processing and mechanical properties in the latest generation staple fiber lines. It includes a specific formulation resistant to "gas fading" coloration, suitable for protecting the polymer during extrusion process and final use.

TYPICAL APPLICATIONS

Specially recommended for staple fibre and multifilament extrusion in high speed equipment.

Suitable for tapes and monofilament

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Additive	Anti-gas fading
Features	Food Contact Acceptable Gas-fading Resistant Good Processability Medium Flow
Uses	Monofilaments Staple Fibers Tape
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Filament Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	5.6	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	35.0	MPa	ISO 527-2
Flexural Modulus	1500	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	85.0	°C	ISO 75-2/B

Extrusion	Nominal Value	Unit
Melt Temperature	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 2583	RTP Company	PC+ABS	RTP
TEREZ PA 6.6 HT 7500 GF 40	TER HELL PLASTIC GMBH	Nylon 66	TEREZ PA 6.6
Cosmic Epoxy E4920FC	Cosmic Plastics, Inc.	Epoxy	Cosmic Epoxy
Hyundai EP Matt MS102/Natural	HYUNDAI EP Co., Ltd.	Polyolefin, Unspecified	Hyundai EP Matt
Karina RED PVC COMPOUND -E711D42/158-B-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina