Order Products : sales@su-jiao.com
Softflex® 8103
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Softflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C4bADr_Softflex-8103.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Softflex® 8103 is a Thermoplastic Elastomer (TPE) product. It is available in North America. Typical application: Engineering/Industrial Parts. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(235°C/1.0 kg) | 42 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 3.18 mm | 1.1 to 1.2 | % | |
| Across Flow : 3.18 mm | 0.97 to 1.1 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 74 to 84 | ||
| Shore A, 10 sec | 70 to 80 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 29.0 | MPa | ASTM D638 |
| Flexural Modulus | 24.5 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-22 Wheel) | 146 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (100% Strain) | 108 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 50% Strain | 0.0242 | MPa | |
| 100% Strain | 0.0295 | MPa | |
| 300% Strain | 0.0429 | MPa | |
| Tensile Elongation (Break) | 970 | % | ASTM D412 |
| Tear Strength | 63.7 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 6.0 | % | |
| 70°C, 22 hr | 75 | % | |
| 100°C, 22 hr | 92 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact | > 36.2 | J | ASTM D3029 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Overmold Bonding | ABS, PC, ABS/PC, PPO |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® S4670 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| TECHNO ABS 130 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| YUCLAIR® RJ300 | SK Global Chemical | MDPE | YUCLAIR® |
| ALCOM® PA6 900/1 MO1 | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
| Celstran® +PP-GF40-04CN15/10 | Celanese Corporation | PP, Unspecified | Celstran® |
