Order Products : sales@su-jiao.com
Estane® 58315 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C3rBfx_Estane-58315-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Polyether Thermoplastic Polyurethane (TPU) Special Feature: Hydrolysis resistance, low temperature performance with a wide processing window Processes: Extrusion: Blown, Flat Die Cast Film, Injection and Cable Jacketing |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 37.0 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (200% Strain) | 14 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 6.20 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 10.3 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 48.3 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 570 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 85.3 | kN/m | ASTM D624 |
| Cracking | 26 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -50.0 | °C | ASTM D3418 |
| Melting Temperature | 135 | °C | DSC |
| Kofler Melting Temperature | 145 | °C | Internal method |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze 2(1650 µm) | 1.8 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 171 | °C | |
| Cylinder Zone 2 Temp. | 177 | °C | |
| Cylinder Zone 3 Temp. | 182 | °C | |
| Cylinder Zone 4 Temp. | 193 | °C | |
| Adapter Temperature | 193 | °C | |
| Melt Temperature | 185 | °C | |
| Die Temperature | 193 | °C |
| Extrusion instructions |
|---|
| Screens: 20-40-80 meshDew Point: -40°C |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | between glass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULABLEND® M/MX 50 | A. Schulman Europe | PC+PBT | SCHULABLEND® |
| VALOX™ V8280 resin | SABIC Innovative Plastics | PBT+PET | VALOX™ |
| Akulon® K223-P2 | DSM Engineering Plastics | Nylon 6 | Akulon® |
| Bergamid™ A700 G20 H (f1) | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Favorite LL660 | Favorite Plastics | LLDPE+MMW-HDPE | Favorite |
