Order Products : sales@su-jiao.com
CERTENE™ HHP-849
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C08HtX_CERTENE-HHP-849.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HHP-849 is a certified prime, natural color base hexene-copolymer grade, designed for EXTRUSION of PIPE. HHP-849 meets PE-3408 non-pressure and pressure pipe service requirements from 1 to 64 inch sized diameters and features good long-term hoop strength performance for applications including municipal potable water pipe, fuel gas pipe, re-lining pipe, industrial and mining pipe, storm and sanitary pipe. HHP-849 processing temperature is 365° to 390°F (185° to 199°C). HHP-849 meets all requirements of ASTM-D4976 - PE 235 & NSF Standard 14/61. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.080 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 8.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(100°C, 1.75mm, 100% Igepal, molding, F50) | > 5000 | hr | ASTM D1693C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 23.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 850 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 4(Compression Molded) | 850 | MPa | ASTM D790 |
| Slow crack propagation PENT | > 100 | hr | ASTM F1473 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Unit classification | PE 345464A | ASTM D3350 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -100 | °C | ASTM D746 |
| Vicat Softening Temperature | 124 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 185 - 199 | °C |
| Note Message | |
|---|---|
| 1 . | Notched Bent Strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WanBlend® WHT-185E5 | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | WanBlend® |
| XYLEX™ X7300CL resin | SABIC Innovative Plastics Europe | PC+Polyester | XYLEX™ |
| Braskem PP CP 401 HC | Braskem | PP Impact Copolymer | Braskem PP |
| Generic Nylon 612 | Generic | Nylon 612 | Generic |
| HIFOR Xtreme® SC74844 | Westlake Chemical Corporation | LLDPE | HIFOR Xtreme® |
