Order Products : sales@su-jiao.com
Vexel 5100 RD
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Custom Resins Group |
| Trademark: | Vexel |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ByoDSx_Vexel-5100-RD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vexel 5100 RD is a 15% glass reinforced polybutylene terephthalate polyester material that features an improved surface. Vexel products have exceptional electrical properties, are quite strong, and are especially stiff, but are typically more brittle than similar nylon products. Vexel PBT is typically used for electrical components, especially with higher voltage requirements, for high heat housings and brackets, and for other functional components where the moisture absorption of nylon may be problematic. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.40 to 0.60 | % | |
| Across Flow | 0.50 to 0.80 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 93.1 | MPa | ASTM D638 |
| Flexural Modulus | 4830 | MPa | ASTM D790 |
| Flexural Strength | 145 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 210 | °C | |
| 1.8 MPa, Unannealed | 191 | °C | |
| Melting Temperature | 227 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 to 138 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Suggested Max Moisture | 0.040 | % | |
| Suggested Shot Size | 30 to 80 | % | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 227 to 243 | °C | |
| Middle Temperature | 232 to 249 | °C | |
| Front Temperature | 238 to 260 | °C | |
| Nozzle Temperature | 238 to 254 | °C | |
| Processing (Melt) Temp | 243 to 260 | °C | |
| Mold Temperature | 71.1 to 93.3 | °C | |
| Injection Pressure | 55.2 to 117 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 41.4 to 96.5 | MPa | |
| Back Pressure | 0.172 to 0.345 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 199 X 138789 EG | RTP Company | PP, Unspecified | RTP |
| Resinoid 1310 | Resinoid Engineering Corporation | Phenolic | Resinoid |
| EMLON® 66 GFR 25 | EMAS Plastik San.Tic.AS. | Nylon 66 | EMLON® |
| Hifax TYC852P E | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
| SCHULAMID® 6 GF 30 4DD BLACK | A. Schulman Europe | Nylon 6 | SCHULAMID® |
