Order Products : sales@su-jiao.com
KOPEL® KP3363HR
| Category: | TPC-ET , Thermoplastic Copolyester Elastomer |
| Manufacturer: | Kolon Plastics, Inc. |
| Trademark: | KOPEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BwEQXY_KOPEL-KP3363HR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KOPEL® KP3363HR is a Thermoplastic Copolyester Elastomer (TPC-ET) product. It can be processed by extrusion and is available in Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 36.3 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 540 | % | ASTM D638 |
| Flexural Modulus (23°C) | 437 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 7.00 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C | 120 | J/m | |
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 65.0 | °C | ASTM D648A |
| Brittleness Temperature 1 | < -70.0 | °C | ASTM D746 |
| Peak Melting Temperature | 210 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Solenoid Brittle Point |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANLON A 5005 | Polykemi AB | ABS+Nylon | SCANLON A |
| ACRYLITE® Resist ZK-F | Evonik Cyro LLC | Acrylic (PMMA) | ACRYLITE® |
| AXELERON™ CS O-3364 NT CPD | The Dow Chemical Company | HDPE | AXELERON™ |
| Daplen™ EE108AE | Borealis AG | TPO | Daplen™ |
| Grupo IDESA GPPS K-3-L-02 | Grupo IDESA, S.A. de C.V. | PS (GPPS) | Grupo IDESA GPPS |
