Order Products : sales@su-jiao.com
MIRASON™ 11P
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals, Inc. |
| Trademark: | MIRASON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BvzPzH_MIRASON-11P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MIRASON™ 11P is a Low Density Polyethylene material. It is available in Asia Pacific for extrusion coating. Typical application of MIRASON™ 11P: Packaging |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.2 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 49 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 8.83 | MPa | |
| Break | 13.7 | MPa | |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 86.0 | °C | ASTM D1525 |
| Melting Temperature | 106 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RECLAIR® F 19010 | Reliance Industries Limited | LLDPE | RECLAIR® |
| Spartech Polycom E65390 | Spartech Polycom | PVC, Unspecified | Spartech |
| ASTAMID™ MB3L | Marplex Australia Pty. Ltd. | Nylon 6 | ASTAMID™ |
| Epolene® E-25 | Westlake Chemical Corporation | PP, Unspecified | Epolene® |
| INVISION™ TX 5173U | A. Schulman Inc. | TPV | INVISION™ |
