Order Products : sales@su-jiao.com
Elastollan® C 88 A
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | BASF Polyurethanes GmbH |
| Trademark: | Elastollan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BvTV1G_Elastollan-C-88-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties. Outstanding tensile strength and high elongation at break, good damping characteristics, a high resilience performance and very good wear resistance. Typical applications Spiral tubing, pneumatic tubing, round belting, technical mouldings e.g. bushes, dust caps, seals, joints, blow moulded bellows, fan belts. Extrusion quality for round belts |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 7619 | ||
| Shore A, 3 sec | 88 | ||
| Shore D, 3 sec | 37 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 30.0 | mm³ | ISO 4649-A |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | DIN 53504 | ||
| 20% Strain | 3.50 | MPa | |
| 100% Strain | 6.00 | MPa | |
| 300% Strain | 13.0 | MPa | |
| Tensile Stress | DIN 53504 | ||
| Yield 1 | 38.0 | MPa | |
| Yield | 50.0 | MPa | |
| Tensile Elongation | DIN 53504 | ||
| Break 2 | 650 | % | |
| Break | 600 | % | |
| Tear Strength 3 | 75 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 25 | % | |
| 70°C, 24 hr | 40 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 to 240 | °C | |
| Mold Temperature | 20.0 to 70.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 150 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | after storage in water for 21 days at 80°C |
| 2 . | after storage in water for 21 days at 80°C |
| 3 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trithene® TX 3003 | Petroquimica Triunfo | LDPE | Trithene® |
| ASI POLYETHYLENE LP 551-01 | A. Schulman Inc. | HDPE Copolymer | ASI POLYETHYLENE |
| LUVOCOM® 6-8669 | LEHVOSS Group | Nylon 12 | LUVOCOM® |
| Sylvin 86042-75 Clear 8422 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Durethan® B 30 S 000000 | LANXESS Corporation | Nylon 6 | Durethan® |
