Order Products : sales@su-jiao.com
MACOMASS PVC MM-PVC I 1570
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | MACOMASS Verkaufs AG |
| Trademark: | MACOMASS PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Bv63qz_MACOMASS-PVC-MM-PVC-I-1570.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MACOMASS PVC MM-PVC I 1570 is a flexible polyvinyl chloride material,. This product is available in Europe, and the processing method is injection molding. The main characteristics of MACOMASS PVC MM-PVC I 1570 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 - 1.22 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 67 - 73 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 14.0 | MPa | ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break) | > 400 | % | ISO 37 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 | °C | |
| Mold Temperature | 30.0 | °C |
| Injection instructions |
|---|
| Screw Length: >20 d |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP H1501 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Vyncolit® RX®1310 | Vyncolit N.V. | DAP | Vyncolit® |
| Axiall PVC 15642 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Kingfa PA66-G30 | Kingfa | Nylon 66 | Kingfa |
| Rotuba CAP CP800 (8% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
