Order Products : sales@su-jiao.com
Bynel® 4033
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | DuPont Packaging & Industrial Polymers |
| Trademark: | Bynel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BuRaC7_Bynel-4033.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BYNEL® Series 4000 resins are anhydride-modified, high-density polyethylene resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. BYNEL 4033 is a grade with a higher level of anhydride modification, and is mainly intended for use as a component in a blend with other polyolefin resins. It is not intended for extrusion in its pure form in typical extrusions or coextrusions. BYNEL Series 4000 resins are excellent moisture barriers and have a good hydrocarbon resistance. This unique combination of properties makes them useful in a variety of coextrusion applications. HDPE/EVOH tubing and HDPE/polyamide bottles for agricultural chemicals are two examples. BYNEL 4000 series resins are most often used in coextrusion with EVA, EVOH, polyamide and PE. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238, ISO 1133 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 128 | °C | ASTM D1525, ISO 306 |
| Peak Melting Temperature | 135 | °C | ASTM D3418, ISO 3146 |
| Freezing Point | 114 | °C | ASTM D3418 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 235 | °C | |
| Cylinder Zone 4 Temp. | 235 | °C | |
| Cylinder Zone 5 Temp. | 235 | °C | |
| Adapter Temperature | 235 | °C | |
| Melt Temperature | < 260 | °C | |
| Die Temperature | 235 | °C |
| Extrusion instructions |
|---|
| Processing conditions shown are for coextrusion with EVOH.Processing conditions for coextrusion with nylon:Zone 1: 160°CZone 2: 185°CZone 3: 235°CZone 4: 260°CZone 5: 260°CAdapter: 260°CDie: 260°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Razamid® B121U-50 | Razin™ Engineering Plastics | Nylon 6 | Razamid® |
| SABIC® PPcompound 8536B | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| Xuchuan XCBD-300 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Durolon® V2602 | Unigel Plásticos | PC | Durolon® |
| CALIBRE™ 351-15 | Sumika Styron Polycarbonate Limited | PC | CALIBRE™ |
