Order Products : sales@su-jiao.com
Medalist® MD-12170 XRD (PRELIMINARY DATA)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Medalist® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Btzb3b_Medalist-MD-12170-XRD-PRELIMINARY-DATA-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Medalist MD-12170 XRD is designed for medical and healthcare applications requiring high elasticity and tensile strength. Medalist MD-12170 XRD is a translucent grade, can be sterilized and is suitable for injection molding and extrusion. This grade also exhibits excellent adhesion to polypropylene. Every ingredient used to formulate this product is either "generally recognized as safe" (GRAS), prior sanctioned, subject to an effective Food Contact Notification (FCN), subject to a Threshold of Regulation (TOR) or identified in one or more sections of Title 21 of the code of Federal Regulations published by the US FDA. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 2.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 70 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow (100% Strain) | 2.12 | MPa | ISO 37 |
| Tensile Stress - Across Flow (Break) | 12.9 | MPa | ISO 37 |
| Tensile Elongation - Across Flow (Break) | 850 | % | ISO 37 |
| Tear Strength 1 | ISO 34-1 | ||
| Transverse flow | 27 | kN/m | ISO 34-1 |
| Flow | 36 | kN/m | ISO 34-1 |
| Compression Set 2(70°C, 22 hr) | 33 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 - 177 | °C | |
| Middle Temperature | 182 - 204 | °C | |
| Front Temperature | 193 - 216 | °C | |
| Nozzle Temperature | 182 - 227 | °C | |
| Processing (Melt) Temp | 182 - 227 | °C | |
| Mold Temperature | 26.7 - 48.9 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.172 - 0.689 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 12.7 | mm |
| Injection instructions |
|---|
| Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C). |
| Note Message | |
|---|---|
| 1 . | Method B, right-angle specimen (without cut) |
| 2 . | Type a |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 900 SI 2 | RTP Company | PSU | RTP |
| Vydyne® 47 | Ascend Performance Materials Operations LLC | Nylon 66 | Vydyne® |
| XYRON™ T0702 | Asahi Kasei Chemicals Corporation | PPE+PP | XYRON™ |
| Alathon® M6080UV | LyondellBasell Industries | HDPE | Alathon® |
| LUVOCOM® 1-0890 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
