Order Products : sales@su-jiao.com
FRAGOM G/459 20
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BtcYyU_FRAGOM-G-459-20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM is the trade-mark of our flame retardant halogen free polyolefine compounds. FRAGOM G/459 20 is a flame retardant crosslinkable compound having good temperature index and oxygen index, suitable for cable sheathing and insulation. It is a conveniently grafted compound able to react in presence of moisture and of a catalyst. We normally suggest our catalyst type MAC/202 or MAC/100 SCU (more active in reaction) REACTION BETWEEN GRAFTING AND CATALYST These two compounds, separately stored, must be mixed before starting extrusion in the ratio: GRAFTING/CATALYST 95/5 We suggest to use the compound to produce cables with size not more than 10 mm². |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 4.0 to 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 48 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 11.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | 160 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (135°C, 168 hr) | 15 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (135°C, 168 hr) | -15 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Set 1 | IEC 60811 | ||
| 200°C | 60 | % | |
| Residual Value : 200°C | 10 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Conductivity | < 5.00 | µS/mm | IEC 60754-2 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | < 1 | % | IEC 60754-1 |
| Temperature Index (Burning) 2 | > 300 | NES 715 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Operating Temperature - EI5 | 90 | °C | BS 7655 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 4.0E+14 | ohms·cm | BS 6622 |
| Dielectric Constant (50 Hz) | 4.60 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 30 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 165 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Cylinder Zone 4 Temp. | 190 | °C | |
| Cylinder Zone 5 Temp. | 205 | °C | |
| Die Temperature | 210 | °C |
| Note Message | |
|---|---|
| 1 . | 20 N/cm² |
| 2 . | 21% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP TPO TPO-257 | Washington Penn Plastic Co. Inc. | TPO | WPP TPO |
| Latimass 62-05 D040 | LATI S.p.A. | Nylon 6 | Latimass |
| LubriOne™ PC-000/5T-2S NC704 | PolyOne Corporation | PC | LubriOne™ |
| Hostacom XBR 169 G D72680 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Sylvin 6034-62UV Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
