Order Products : sales@su-jiao.com
OP - ABS ABS 4-8 SS
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Oxford Polymers |
| Trademark: | OP - ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BsyYyo_OP---ABS-ABS-4-8-SS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EMI / ESD SHIELDING |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 5.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 - 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 51.7 | MPa | ASTM D638 |
| Fracture | 52.4 | MPa | ASTM D638 |
| Flexural Modulus | 3520 | MPa | ASTM D790 |
| Flexural Strength | 91.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (4°C) | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.18mm | 107 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 3.18mm | 93.3 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | HB | UL 94 | |
| 3.18 mm | HB | UL 94 |
| Additional Information |
|---|
| Melt Mass- Flow Rate (MFR), ASTM D1238, 230°C/ 3.8kg: 3 to 8 g/10 minSurface Resitivity, ASTM D257: 1E1 to 1E3 ohms |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 188 - 210 | °C | |
| Middle Temperature | 204 - 227 | °C | |
| Front Temperature | 216 - 249 | °C | |
| Processing (Melt) Temp | 218 - 249 | °C | |
| Mold Temperature | 48.9 - 82.2 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMSTER PE321G6NT | Polyram Ram-On Industries | PET | RAMSTER |
| Qenos PE CBL78 | Qenos Pty Ltd | MDPE | Qenos PE |
| VESTOSINT® 1184 white | Evonik Industries AG | Nylon 12 | VESTOSINT® |
| Paracril® 33.80XL | INSA | NBR | Paracril® |
| Hostacom PC072-3 NATRL | LyondellBasell Industries | PP Homopolymer | Hostacom |
