Order Products : sales@su-jiao.com

Prime Clear-X 200

Category:	PS (HIPS) , High Impact Polystyrene
Manufacturer:	Primex Plastics Corporation
Trademark:	Prime Clear-X
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BsgGCs_Prime-Clear-X-200.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

This material was designed and developed specifically for rigid packaging markets. Prime Clear-X 200 offers a remarkable combination of toughness, clarity, stiffness, tear resistance, low stress whitening, cost and good hinge properties.

Applications:
The above features make this product suitable for retail clam shell packaging. Applications include electronics, toys, pharmaceutical, medical, personal care and consumer goods. It is rated for medical tray applications (USP Class VI-500) and meets FDA regulation 21 CFR 177.1640.

Processing:
For the fabricator, Prime Clear-X 200 is easily and economically processed using conventional processing techniques. Options for part denesting include use of a silicone bath during sheet production or an internal denest additive.

Finishing:
Options for the joining and bonding of Prime Clear-X 200 include heat sealing, solvent bonding, ultrasonic welding and adhesive bonding. RF Welding is not recommended. Trim tooling should be sharp and clear of burrs for a clean cut. Dull trim tooling will result in "fuzz" trim. This product can be sterilized by three types of processes; Gamma, EtO, and E-Beam.

Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process.

Colors, Textures and Capabilities:
Prime Clear-X 200 is compatible with HIPS or GP carriers so it may be color matched to meet your specific requirements. Textures are available but smooth is the primary surface.

General Information
Features	Bondability E-beam Sterilizable Ethylene Oxide Sterilizable Good Adhesion Good Stiffness Good Tear Strength Good Toughness High Clarity High Heat Resistance High Impact Resistance High Tensile Strength Radiation Sterilizable Salt Water/Spray Resistant Stress Whitening Resistant Ultrasonic Weldable
Uses	Consumer Applications Electrical/Electronic Applications Medical/Healthcare Applications Packaging Personal Care Pharmaceuticals Rigid Packaging Support Trays Toys
Agency Ratings	FDA 21 CFR 177.1640 USP Class VI 500
Appearance	Clear/Transparent Colors Available
Forms	Sheet

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.03	g/cm³	ASTM D792
Molding Shrinkage - Flow	0.40 to 0.70	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, 0.762 mm)	31.7	MPa	ASTM D638
Tensile Elongation (Break, 0.762 mm)	30	%	ASTM D638
Flexural Modulus (0.762 mm)	1720	MPa	ASTM D790
Flexural Strength (0.762 mm)	48.3	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Instrumented Dart Impact (Total Energy)	9.15	J	ASTM D3763

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, 0.762 mm)	76.7	°C	ASTM D648
Vicat Softening Temperature	93.3	°C	ASTM D1525

Optical	Nominal Value	Unit	Test Method
Haze	3.0 to 4.0	%	ASTM D1003

Resin Grade	Manufacturer	Category	Trademark
SWANCOR Epoxy 977-S	SWANCOR IND. CO., LTD.	Epoxy	SWANCOR Epoxy
TRIBIT® 1500G20K	Samyang Corporation	PBT	TRIBIT®
NIMA HL 18400	Ovation Polymers Inc.	HDPE	NIMA
BJB Polyurethane WC-780 A/B	BJB Enterprises, Inc.	PUR, Unspecified	BJB Polyurethane
POCAN® B 1505 000000	LANXESS GmbH	PBT	POCAN®