| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | GLS Polymers Pvt. Ltd. |
| Trademark: | GLS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Brvsra_GLS-PP-YG69.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| PP 30%GF (Coupled) Precolor |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 to 1.22 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | > 4.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 0.10 to 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 30.0 to 36.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 3.0 to 6.0 | % | ASTM D638 |
| Flexural Modulus | 4000 to 4400 | MPa | ASTM D790 |
| Flexural Strength | 60.0 to 65.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | > 40 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 124 to 127 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 190 to 230 | °C | |
| Mold Temperature | 35.0 to 65.0 | °C | |
| Injection Pressure | 69.0 to 100 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 8271-55 | ExxonMobil Chemical | TPV | Santoprene™ |
| YUNGSOX® PP 3015W | Formosa Polypropylene | PP Impact Copolymer | YUNGSOX® PP |
| LONGLITE® PMC T 33 | CCP Group | Phenolic | LONGLITE® PMC |
| Paracril® P3350CC2 | INSA | NBR | Paracril® |
| PermaStat® 303 | RTP Company | PC | PermaStat® |