Order Products : sales@su-jiao.com
Hanwha Total PE 4222F
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BroOUN_Hanwha-Total-PE-4222F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 4222F is a linear low-density polyethylene resin for heavy duty films for packaging. This grade is designed to be processed in conventional blown film equpment. 4222F is a butene comonomer grade. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 9.81 | MPa | ASTM D882 |
| TD : Yield | 10.8 | MPa | ASTM D882 |
| MD : Fracture | 40.2 | MPa | ASTM D882 |
| TD : Fracture | 31.4 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 620 | % | ASTM D882 |
| TD : Fracture | 840 | % | ASTM D882 |
| Dart Drop Impact | 150 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 150 | g | ASTM D1922 |
| TD : 25 µm | 370 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ASTM D1525 1 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 55 | ASTM D2457 | |
| Haze | 11 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 210 | °C | |
| Cylinder Zone 2 Temp. | 150 - 210 | °C | |
| Cylinder Zone 3 Temp. | 150 - 210 | °C | |
| Cylinder Zone 4 Temp. | 150 - 210 | °C | |
| Cylinder Zone 5 Temp. | 150 - 210 | °C | |
| Die Temperature | 210 - 240 | °C |
| Extrusion instructions |
|---|
| Blow up ratio: 1 to 2 |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 GI-300B | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| Beamset 1200 | Arakawa Chemical Industries, Ltd. | Epoxy | Beamset |
| Geon™ Vinyl Rigid Extrusion L7703 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| KYOCERA KE-200DC-1 | KYOCERA Chemical Corporation | Epoxy | KYOCERA |
| POLYfill PP CCP20020 UV | Polykemi AB | PP, Unspecified | POLYfill |
