Order Products : sales@su-jiao.com
Devcon Combo Wear FC
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Devcon |
| Trademark: | Devcon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Bqou9n_Devcon-Combo-Wear-FC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
High-tech, epoxy compound for quickly repairing processing equipment and returning to service in as little as 1.5 hours Intended Use:
Product features:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.20 | g/cm³ | |
| Specific Volume | 0.448 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Temperature Resistance | |||
| Dry | 149 | °C | |
| Wet | 60 | °C | |
| Tensile Shear Adhesion | 10.0 | MPa | ASTM D1002 |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.080 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 87 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 29.6 | MPa | ASTM D638 |
| Flexural Strength | 49.2 | MPa | ASTM D790 |
| Compressive Strength | 75.8 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 6.1E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant | 41.0 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 2.0 Mixing ratio by capacity: 2.0 | ||
| Component B | Mixing ratio by weight: 1.0 Mixing ratio by capacity: 1.0 | ||
| Pot Life (24°C) | 7.0 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Curing Time | 8.0 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NORYL™ LTA6020 resin | SABIC Innovative Plastics Asia Pacific | PPE+PS | NORYL™ |
| GAPEX® RPP43EV01NA | Ferro Corporation | PP Homopolymer | GAPEX® |
| HiFill® PPS GF/M65 BK | Techmer Engineered Solutions | PPS | HiFill® |
| LUVOCOM® 1301-8524-1 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
| TECHNYL® A 218 V33 BLACK 51 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
