Order Products : sales@su-jiao.com
ISPLEN® PM 474 AT
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BosLsX_ISPLEN-PM-474-AT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene copolymer, 40% mineral filler reinforced and improved processability. ISPLEN® PM 474 AT shows a high stiffness keeping a good impact strength level. This product is high heat stabilised. APPLICATIONS
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.26 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 16 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | 0.60 | % | ISO 2577 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 67 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3900 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Yield | 22.0 | MPa | |
| Break | 20.0 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Yield | 1.7 | % | |
| Break | 3.5 | % | |
| Flexural Modulus | 3500 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -40°C | 1.4 | kJ/m² | |
| -20°C | 1.7 | kJ/m² | |
| 0°C | 1.8 | kJ/m² | |
| 23°C | 2.4 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -40°C | 10 | kJ/m² | |
| -20°C | 11 | kJ/m² | |
| 0°C | 12 | kJ/m² | |
| 23°C | 21 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 100 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 63.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 150 | °C | ISO 306/A120 |
| -- | 80.0 | °C | ISO 306/B120 |
| Note Message | |
|---|---|
| 1 . | 150x100x3mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAC® PA-764 | CHI MEI CORPORATION | ABS | POLYLAC® |
| PrimaFlex® LD 21020 | Plastic Solutions, Inc. | LDPE | PrimaFlex® |
| SOLPLAST TC 6000B | UTEKSOL d.o.o. | SBS | SOLPLAST TC |
| Varcum 29607 | Durez Corporation | Phenolic | Varcum |
| Elastron® G G601.A95.B | Elastron USA, Inc. | SEBS | Elastron® G |
