Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding M4950
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BmgKcr_Geon-Vinyl-Rigid-Molding-M4950.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This product is used for short-term (3 years) outdoor use. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 | g/cm³ | ASTM D792 |
| Spiral Flow | 73.7 | cm | |
| Molding Shrinkage - Flow | 0.20 - 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2960 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 55.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 30 | % | ASTM D638 |
| Flexural Modulus | 2960 | MPa | ASTM D790 |
| Flexural Strength | 89.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Injection Molded) | 53 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 6.35mm | 68.0 | °C | ASTM D648 |
| 0.45 MPa, annealed, 6.35mm | 69.0 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 6.35mm | 66.0 | °C | ASTM D648 |
| 1.8 MPa, annealed, 6.35mm | 63.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm, TP | V-0 | UL 94 | |
| 1.90 mm, TP | 5VB | UL 94 | |
| 3.00 mm, TP | 5VA | UL 94 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance 4(3180 µm) | 70.0 | % | ASTM D1003 |
| Haze (3180 µm) | 8.0 | % | ASTM D1003 |
| Additional Information |
|---|
| XENON ARC WEATHEROMETER（delta E = 2.1，CIE Lab，2000 hrs.，SAE J1960） |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 - 204 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 51mm/min |
| 2 . | Type 1, 51mm/min |
| 3 . | Type 1, 51mm/min |
| 4 . | CIE light source c |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 687 HEC | RTP Company | ABS | RTP |
| Stanyl® TE200F8 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Baydur® 728 IBS (40 pcf) | Covestro - PUR | PUR-MDI | Baydur® |
| CROSSVINIL EK/3 AZC | Crosspolimeri S.p.A. | PVC, Unspecified | CROSSVINIL |
| HiFill® PPSU GF40 | Techmer Engineered Solutions | PPSU | HiFill® |
