Order Products : sales@su-jiao.com
Sevrene® 3582-80A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Vi-Chem Corporation |
| Trademark: | Sevrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BhXSGP_Sevrene-3582-80A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sevrene® 3582-80A is a Thermoplastic Elastomer (TPE) material. It is available in North America. Typical application of Sevrene® 3582-80A: Automotive |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 82 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 3.20 | MPa | ISO 37 |
| Tensile Stress 2(Yield) | 13.0 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 790 | % | ISO 37 |
| Tear Strength 4 | 47 | kN/m | ISO 34-1 |
| Compression Set | ASTM D395 | ||
| 23°C, 168 hr | 43 | % | |
| 100°C, 168 hr | 58 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 1008 hr) | -3.0 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (100°C, 1008 hr) | -15 | % | ASTM D573 |
| Thermal | Nominal Value | Test Method | |
|---|---|---|---|
| Cold Flexibility (-30°C) | Pass | FLTM BN 102-01 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fogging - 6 hrs | SAE J1756 | ||
| 38°C | 98 | % | |
| 95°C | 98 | % |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Arizona Weathering 5 | 0.220Pass (Black only) | SAE J1976 | |
| Florida Weathering 6 | 0.330Pass (Black only) | SAE J1976 | |
| Weather Resistance | |||
| -- 7 | 0.570Pass (Black only) | SAE J1885 | |
| -- 8 | 0.300Pass (Black only) | SAE J1960 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | 61 | mm/min | FMVSS 302 |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | 500 mm/min |
| 5 . | 2 years, Delta E |
| 6 . | 2 years, Delta E |
| 7 . | Interior Xenon, 1240 kj/m², Delta E |
| 8 . | Exterior Xenon Arc, 2500 kj/m², Delta E |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2800-40D | RTP Company | TPO (POE) | RTP |
| Royalite R522 | Spartech Plastics | PMMA+PVC | Royalite |
| GELOY™ XP4034 resin | SABIC Innovative Plastics | ASA+PC | GELOY™ |
| HiFill® ABS GF30 | Techmer Engineered Solutions | ABS | HiFill® |
| Sylvin 9600-85 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
