Order Products : sales@su-jiao.com
Salflex 135
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Salflex Polymers Ltd. |
| Trademark: | Salflex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BhQTWK_Salflex-135.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Salflex 135 is a polyolefin thermoplastic elastomer (TPO (POE)) product,. It can be processed by blow molding or extrusion and is available in North America. The main characteristics are: impact resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.50 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 5 seconds | 92 | ASTM D2240 | |
| Shaw D, 5 seconds | 35 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 100 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 11.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 620 | % | ASTM D412 |
| Tear Strength | 70.0 | kN/m | ASTM D624 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -28°C | No Break | ASTM D256 | |
| 23°C | No Break | ASTM D256 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 - 75.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 180 - 220 | °C | |
| Cylinder Zone 2 Temp. | 180 - 225 | °C | |
| Cylinder Zone 3 Temp. | 180 - 225 | °C | |
| Cylinder Zone 4 Temp. | 180 - 225 | °C | |
| Melt Temperature | 180 - 230 | °C | |
| Die Temperature | 180 - 225 | °C |
| Extrusion instructions |
|---|
| Blow Molding Mold Temperature: 20 to 50°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPV 24573 | Teknor Apex Company | TPV | Sarlink® TPV |
| SILVER® PE 1011.LDH | Guangdong Silver Age Sci & Tech. Co., Ltd | LLDPE | SILVER® |
| TEKNIFLEX® PTOA 200 | Tekni-Films, a div of Tekni-Plex | Film, PE/EVOH/PCTFE | TEKNIFLEX® |
| INLUBE PA610GF35TF5 | Infinity LTL Engineered Compounds | Nylon 610 | INLUBE |
| Hostacom X M2 R13 100051 | LyondellBasell Industries | PP Copolymer | Hostacom |
