Order Products : sales@su-jiao.com
Kelon® B FR H CET/05-V2HF
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Kelon® B |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BglbZr_Kelon-B-FR-H-CET-05-V2HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polyamide 6 (PA6) based compound. Heat stabilised. Mineral filler. UL94 V-2 classified, halogens-based flame retardants and red phosphorous free. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.17 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Across Flow : 2.00 mm | 0.80 to 1.0 | % | |
| Flow : 2.00 mm | 0.80 to 1.0 | % | |
| Water Absorption (23°C, 24 hr) | 0.35 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1 | ||
| 23°C | 4000 | MPa | |
| 60°C | 1700 | MPa | |
| 90°C | 1000 | MPa | |
| 120°C | 600 | MPa | |
| 150°C | 400 | MPa | |
| Tensile Stress | ISO 527-2/5 | ||
| Yield, 23°C | 75.0 | MPa | |
| Break, 23°C | 70.0 | MPa | |
| Tensile Strain | ISO 527-2/5 | ||
| Yield, 23°C | 3.2 | % | |
| Break, 23°C | 5.0 | % | |
| Break, 60°C | > 100 | % | |
| Break, 90°C | > 100 | % | |
| Break, 120°C | > 100 | % | |
| Break, 150°C | > 100 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 3.5 | kJ/m² | |
| 23°C | 3.5 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -20°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 140 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 65.0 | °C | ISO 75-2/A |
| Continuous Use Temperature 2 | 65.0 | °C | |
| Vicat Softening Temperature | 160 | °C | ISO 306/B50 |
| CLTE - Flow (30 to 100°C) | 5.0E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (Solution A) | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.750 mm) | V-2 | UL 94 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 1.00 mm | 960 | °C | |
| 2.00 mm | 960 | °C | |
| Oxygen Index | 26 | % | ASTM D2863 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Dimensional Stability | 74.0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 100 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Regrind | 15 | % | |
| Processing (Melt) Temp | 230 to 250 | °C | |
| Mold Temperature | 70.0 to 100 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | 60 MPa |
| 2 . | 20,000 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E790MSJR | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| STERLENE™ BMU130D | R&P (Pte.) Ltd. | TPO (POE) | STERLENE™ |
| ELASTOSIL® LR 3843/30 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| KEBAFLEX® SG 25 A.1 | BARLOG plastics GmbH | TES | KEBAFLEX® |
| PIVINEL™ SEM-P3 | HELLENIC CABLES S.A. | PVC, Unspecified | PIVINEL™ |
