Order Products : sales@su-jiao.com
CONTINUUM™ DMDE-1250 NT 7
| Category: | HDPE , High Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | CONTINUUM™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Bg3M8h_CONTINUUM-DMDE-1250-NT-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CONTINUUM™ DMDE-1250 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics:
Complies with:
|
| General Information | |
|---|---|
| Additive |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.955 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 10% Igepal, F50 | 272 | hr | ASTM D1693 |
| 50°C, 100% Igepal, F50 | > 2000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 28.3 | MPa | ASTM D638 |
| Fracture | 22.1 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 9.0 | % | ASTM D638 |
| Fracture | 690 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 1100 | MPa | ASTM D790B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 68.3 | °C | ASTM D648 |
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 130 | °C | Internal method |
| Peak Crystallization Temperature (DSC) | 117 | °C | Internal method |
| Additional Information |
|---|
| 根据 ASTM D 4976 进行基板模制和测试。 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 156 UV | RTP Company | PP Copolymer | RTP |
| CALIBRE™ MEGARAD™ 2081-15 | Trinseo | PC | CALIBRE™ |
| GAPEX® RPP06EB94NA | Ferro Corporation | PP, Unspecified | GAPEX® |
| HYDEX® 4101L | Ensinger Inc. | Polyester, TP | HYDEX® |
| Sylvin 9077-85 Grey 9470 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
