Order Products : sales@su-jiao.com
Baytec® GS-V85A (96A)
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | Covestro - PUR |
| Trademark: | Baytec® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BdQZGh_Baytec-GS-V85A-96A-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Baytec GS-V85A is a two-component, one-shot system that yields a solid polyurethane elastomer. The isocyanate component is an isocyanate-terminated (MDI) polyester prepolymer, and the polyol component is a polyethylene/polybutylene adipate diol. The Baytec GS-V85A system is used in the production of cast polyurethane elastomers. As with any product, use of the Baytec GS-V85A system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. |
| General Information | |
|---|---|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 96 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 43.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 490 | % | ASTM D412 |
| Tear Strength | |||
| -- 1 | 126 | kN/m | ASTM D624 |
| Cracking | 64 | kN/m | ASTM D1938 |
| Compression Set (70°C, 22 hr) | 23 | % | ASTM D395B |
| Bayshore Resilience | 42 | % | ASTM D2632 |
| Thermoset | Nominal Value | ||
|---|---|---|---|
| Thermoset Components | |||
| Part C 2 | Mixing ratio by weight: 20 | ||
| Component a 3 | Mixing ratio by weight: 120 | ||
| Component B 4 | Mixing ratio by weight: 80 |
| Additional Information |
|---|
| Part A Type: Isocyanate Appearance: Pale yellow liquid Specific Gravity @ 25°C: 1.20 Viscosity @25°C: 1100 mPa Flash Point, PMCC: 207°C NCO: 18.9 wt% Bulk Density at 25°C: 10.01 lb/gal Part B Type: Polyol Appearance: Light yellow liquid Specific Gravity @ 25°C: 1.17 Viscosity @25°C: Semisolid Flash Point, PMCC: 216°C Bulk Density at 25°C: 9.76 lb/gal Hydroxyl Number: 55 mg KOH/g Material Temperature: 55 to 60°CMold Temperature: 110°CDemold Time: 0.5 to 4 hr |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | 1,4 Butone Diol |
| 3 . | Isocyanate |
| 4 . | Polyol |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ReoFlex® 40 | Smooth-On, Inc | PUR, Unspecified | ReoFlex® |
| Badamid® A70 TM-Z3 | Bada AG | Nylon 66 | Badamid® |
| Amodel® ET-1000 HS | Solvay Specialty Polymers | PPA | Amodel® |
| Ecomass® 4703BI62 | Ecomass Technologies | PUR, Unspecified | Ecomass® |
| ELIX™ ABS P3H-AT | ELIX Polymers, S. L. | ABS | ELIX™ ABS |
