Order Products : sales@su-jiao.com
Edgetek™ XP9242701
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Edgetek™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Bbow8A_Edgetek-XP9242701.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Edgetek™XP9242701 is a polyphenylene sulfide (PPS) product, which contains fillers of 30% glass fiber reinforced materials and 10% carbon fiber reinforced materials. It can be processed by injection molding and is available in the Asia-Pacific region. The main characteristics are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.65 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 - 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 258 | MPa | ASTM D638 |
| Flexural Modulus | 18000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 60.0 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 265 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | < 1.0E+9 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm, ALL) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 130 - 150 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Rear Temperature | 270 - 280 | °C | |
| Middle Temperature | 290 - 330 | °C | |
| Front Temperature | 290 - 330 | °C | |
| Nozzle Temperature | 280 - 320 | °C | |
| Mold Temperature | 120 - 150 | °C | |
| Injection Pressure | 70.0 - 100 | MPa | |
| Holding Pressure | 50.0 - 80.0 | MPa | |
| Back Pressure | 1.00 - 2.50 | MPa | |
| Screw Speed | 80 - 120 | rpm |
| Injection instructions |
|---|
| Injection Speed: 50 to 80%Holding Time: 3 to 9 secInjection Time: 1 to 3 secCycle Time: 18 to 70 sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 D GB 30 | RTP Company | Nylon 612 | RTP |
| Spartech Polycom SCR7-7022R | Spartech Polycom | PC | Spartech |
| YUCLAIR® FG450 | SK Global Chemical | LLDPE | YUCLAIR® |
| Sylvin 8309-65 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 5170-85 Green 3209 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
