Order Products : sales@su-jiao.com
PRIMALLOY® B1800
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | PRIMALLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BZa0GF_PRIMALLOY-B1800.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRIMALLOY® B1800 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of PRIMALLOY® B1800: Low Hardness. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.01 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 2.00 mm | 1.4 | % | |
| Flow : 2.00 mm | 1.7 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 83 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 13.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 670 | % | ISO 37 |
| Tear Strength | 56 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 92.0 | °C | JIS K7206 |
| Note Message | |
|---|---|
| 1 . | 120x120x2 mm test plaque |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam AFR200Y | Eurostar Engineering Plastics | Nylon 66 | Starflam |
| Nordbak Cold Cure Backing | Loctite® | Epoxy | Nordbak |
| apigo® D 40T | API SpA | TPO (POE) | apigo® |
| Petrothene® GA503 | LyondellBasell Industries | LLDPE | Petrothene® |
| LNP™ THERMOCOMP™ WF008 compound | SABIC Innovative Plastics | PBT | LNP™ THERMOCOMP™ |
