Order Products : sales@su-jiao.com
MAJORIS G410 - 8229
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BYCsmU_MAJORIS-G410---8229.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MAJORIS G410 - 8229 is a special long glass fibre reinforced polypropylene grade, for injection moulding and extrusion. The long glass fibres, chemically coupled to the polypropylene matrix, are providing with outstanding mechanical properties. MAJORIS G410 - 8229 is available both in black (MAJORIS G410 - 8229 ) and natural (MAJORIS G410). Other colours can be provided on request. APPLICATIONS MAJORIS G410 - 8229 is intended for injection moulding of highly demanding technical applications. The excellent properties of MAJORIS G410 - 8229 make it suitable for:
MAJORIS G410 - 8229 can, in many of these applications, substitute other engineering plastics or metal alloys. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.30 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 8650 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 129 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 2.2 | % | ISO 527-2/50 |
| Flexural Modulus | 7700 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 28 | kJ/m² | ISO 179/1eA |
| 23°C | 24 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 55 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 162 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 145 | °C | ISO 306/B |
| CLTE - Flow | ASTM D696 | ||
| -30°C | 4.4E-5 | cm/cm/°C | ASTM D696 |
| 23°C | 3.1E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 230 - 250 | °C | |
| Processing (Melt) Temp | 250 - 280 | °C | |
| Mold Temperature | 80.0 - 100 | °C | |
| Injection Pressure | 30.0 - 60.0 | MPa | |
| Injection Rate | Slow | ||
| Screw Speed | 30 - 150 | rpm |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressureBack pressure: as low as possible, 0 to 10%Holding time: as long as practical |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® A MF25 BK45 | Ravago Group | Nylon 66 | Ravamid® |
| Unichem 7000 | Colorite Polymers | PVC, Unspecified | Unichem |
| AKROMID® S3 GF 50 1 black (3441) | AKRO-PLASTIC GmbH | Nylon 610 | AKROMID® |
| Anjacom® R050/65S | Almaak International GmbH | PC+ABS | Anjacom® |
| Geon™ Vinyl Flexible R277AM | PolyOne Corporation | PVC+NBR | Geon™ Vinyl Flexible |
