Order Products : sales@su-jiao.com

Pinnacle PP 1335 Z

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BY6Mf1_Pinnacle-PP-1335-Z.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

35 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH NUCLEATION AND ANTISTAT FOR THIN WALL INJECTION MOLDING

Pinnacle Polymers Polypropylene 1335 Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for thin-wall injection molded applications including closures, food containers and miscellaneous consumer products applications that require high stiffness.

The 1335 Z product provides:

Superior color and processing stability

Low odor and taste

Excellent flow characteristics

High stiffness and fast set-up behavior

UL Listed

Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

General Information
Additive	Antistatic Nucleating Agent
Features	Antistatic Food Contact Acceptable Good Color Stability Good Flow Good Processing Stability High Stiffness Homopolymer Low to No Odor Low to No Taste Nucleated
Uses	Closures Consumer Applications Food Containers Thin-walled Parts
Agency Ratings	FDA 21 CFR 177.1520(c) 1.1a UL Unspecified Rating
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	35	g/10 min	ASTM D1238
Molding Shrinkage - Flow	1.3	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	39.3	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	8.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1720	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	32	J/m	ASTM D256
Notched Izod Impact (Area) ⁵(23°C, 3.20 mm, Injection Molded)	3.10	kJ/m²	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	127	°C	ASTM D648

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I
5 .	Type I

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SSH5569	Teknor Apex Asia Pacific PTE. LTD.	PVC, Flexible	Sinvicomp
Veradel® A-301	Solvay Specialty Polymers	PESU	Veradel®
Vyncolit® 2004B	Vyncolit N.V.	Epoxy	Vyncolit®
NuSil FS3-3730	NuSil Technology	Silicone	NuSil
4PROP® 9D02440 UV	4Plas	PP Homopolymer	4PROP®