Order Products : sales@su-jiao.com

Bormed™ LE6601-PH

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Borealis AG
Trademark:	Bormed™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BWXXbE_Bormed-LE6601-PH.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Bormed LE6601-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6601-PH is an additive free low density polyethylene which is used to produce soft and flexible packages for pharmaceutical products. The material can be converted via blow moulding, including BFS technology, or IBM into small bottles or ampoules. However, material can as well be used in injection moulding and blown film process. The flexibility of the materials will facilitate the dosing of the medicine when used in ampoules and bottles. Articles made from Bormed LE6601-PH can be steam sterilised at maximum 105 °C. Material can be sterilised with ethylene oxide as well with radiation up to 35 kGy.

Message

Bormed LE6601-PH is a resin intended for evaluation for use in Healthcare applications.

Bormed LE6601-PH is an additive free low density polyethylene which is used to produce soft and flexible packages for pharmaceutical products. The material can be converted via blow moulding, including BFS technology, or IBM into small bottles or ampoules. However, material can as well be used in injection moulding and blown film process. The flexibility of the materials will facilitate the dosing of the medicine when used in ampoules and bottles. Articles made from Bormed LE6601-PH can be steam sterilised at maximum 105 °C. Material can be sterilised with ethylene oxide as well with radiation up to 35 kGy.

General Information
Features	Additive Free Good Flexibility Low Density Recyclable Material Soft
Uses	Bottles Medical/Healthcare Applications Pharmaceutical Packaging
Processing Method	Blow Molding Blown Film Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.922	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.5	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	240	MPa	ISO 527-2/1
Tensile Stress (Yield)	10.0	MPa	ISO 527-2/50
Flexural Modulus	200	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature	49	°C	ISO 75-2

Injection	Nominal Value	Unit
Processing (Melt) Temp	165 to 200	°C

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SRF9702	Teknor Apex Asia Pacific PTE. LTD.	PVC, Rigid	Sinvicomp
Andur 850 AP	Anderson Development Company	PUR-Est/eth,TDI	Andur
Kelon® B FR H CET/05-V2HF	LATI S.p.A.	Nylon 6	Kelon® B
PERLEX® R3510	A. Schulman Europe	PC	PERLEX®
Braskem PE SLL318	Braskem	LLDPE	Braskem PE