Order Products : sales@su-jiao.com
Advanced Composites SA-15NF
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BTXMod_Advanced-Composites-SA-15NF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Advanced Composites SA-15NF is a polypropylene product,. It is available in North America. The main characteristics are: high rigidity. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 24 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.00 mm) | 1.2 - 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 94 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 28.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 50 | % | ASTM D638 |
| Flexural Modulus 3 | 2000 | MPa | ASTM D790 |
| Flexural Strength 4 | 37.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 56 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 125 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 191 | °C | |
| Middle Temperature | 199 - 210 | °C | |
| Front Temperature | 221 | °C | |
| Nozzle Temperature | 216 | °C | |
| Processing (Melt) Temp | 193 - 227 | °C | |
| Mold Temperature | 26.7 - 43.3 | °C | |
| Injection Rate | Slow-Moderate | ||
| Cushion | 10.0 - 20.0 | mm |
| Injection instructions |
|---|
| Screw RPM: 1 to 2 secs before mold openInjection Pressure: 50 to 60% of machine capacity |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4005 SI | RTP Company | PPA | RTP |
| Ad-Tech Epoxy EC-413 Medium LP | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Hylex® P1010G20 | Ravago Manufacturing Americas, LLC | PC | Hylex® |
| INNOPOL® PE CS 5-8250 W | Inno-Comp Ltd. | HDPE | INNOPOL® PE |
| LUVOCOM® 1301-8940 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
