Extir® EH 5000

Category:	PS (EPS) , Expanded Polystyrene
Manufacturer:	Versalis S.p.A.
Trademark:	Extir®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BSVR5N_Extir-EH-5000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Extir EH 5000 is an expandable polystyrene in the form of spherical beads of medium-large particle size, with a low pentane content as blowing agent. Extir does not contain CFC or HCFC. This grade is used for the very fast cycle production of large shape mouldings and block moulding over a wide density range. It is characterised by a very short maturing time, even at high density, excellent moulding processability, good fusion, good surface finishing and very good dimensional stability. Extir EH 5000 is a very fast cycling grade used for production of large, thick section mouldings. It can also be used for the production of medium / high density blocks. Finished products exhibit high fusion, high resistance to impact / mechanical stress, and an outstanding dimensional stability. Typical applications are: large sized or special industrial packaging packaging with excellent cushioning properties for electronic items internal shells for crash helmets medium / high density blocks for thermal insulation

Message

Extir EH 5000 is an expandable polystyrene in the form of spherical beads of medium-large particle size, with a low pentane content as blowing agent. Extir does not contain CFC or HCFC.
This grade is used for the very fast cycle production of large shape mouldings and block moulding over a wide density range. It is characterised by a very short maturing time, even at high density, excellent moulding processability, good fusion, good surface finishing and very good dimensional stability.

Extir EH 5000 is a very fast cycling grade used for production of large, thick section mouldings. It can also be used for the production of medium / high density blocks. Finished products exhibit high fusion, high resistance to impact / mechanical stress, and an outstanding dimensional stability.

Typical applications are:

large sized or special industrial packaging

packaging with excellent cushioning properties for electronic items

internal shells for crash helmets

medium / high density blocks for thermal insulation

General Information
Additive	Blowing Agent 2
Features	Expandable Fast Molding Cycle Food Contact Acceptable Good Dimensional Stability Good Processability Good Surface Finish High Impact Resistance High Strength Thermally Insulating
Uses	Industrial Applications Packaging Safety Helmets Sporting Goods
Agency Ratings	EU 90/128/EEC
Forms	Spheres

Physical	Nominal Value	Unit
Density	0.0170 to 0.0800	g/cm³
Apparent Density
-- ¹	0.02	g/cm³
--	0.59 to 0.63	g/cm³
Particle Size	1.00 to 2.00	mm

Note Message
1 .	on a continuous pre-expander after two expansions

Resin Grade	Manufacturer	Category	Trademark
Sylvin 8756-90 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
apinat® DP2267 P	API SpA	Biodeg Polymers	apinat®
GLS Nylon 6 PN06 Halogen Free	GLS Polymers Pvt. Ltd.	Nylon 6	GLS Nylon 6
LNP™ LUBRICOMP™ UCL36ASP compound	SABIC Innovative Plastics Europe	PPA	LNP™ LUBRICOMP™
Sylvin 2970-60 Clear 8382	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin