Order Products : sales@su-jiao.com
Andur 850 AP/Curene® 442
| Category: | PUR-Est/eth,TDI , Polyurethane (Polyester/Polyether mix, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BPd3B1_Andur-850-AP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 850-AP is the result of several years of research to develop a high performance moderate cost prepolymer for the cast urethane industry. This product is a polyester/polyether TDI terminated coprepolymer. An elastomer with a hardness of 84 to 86 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 5.38 | MPa | ASTM D412 |
| 300% strain | 9.10 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 46.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 650 | % | ASTM D412 |
| Compression Set | 30 | % | ASTM D395B |
| Bayshore Resilience | 35 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 3.0 - 6.0 | min | |
| Demold Time (100°C) | 20 | min | |
| Post Cure Time (100°C) | 4.0 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 84 to 86Die C Tear, ASTM D1004: 365 pliAverage Split Tear, ASTM D1938: 233 pliStoichiometry Curative Level: 95%Cure Time, 150 to 160°F: OvernightMix Temperature: Andur 850 AP: 180-212°F Curene 442: 250°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 748 | RTP Company | HDPE | RTP |
| SABIC® PPcompound 2500-4 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| S&E Automotive XP44-10MG | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E Automotive |
| Plaslube® PA6/6 TL20 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| Durethan® DP 2131/20 H3.0 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
