Order Products : sales@su-jiao.com
ADDILENE PMD 50306
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | ADDIPLAST |
| Trademark: | ADDILENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BOK7ix_ADDILENE-PMD-50306.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADDILENE PMD 50306 is a Polypropylene Copolymer (PP Copolymer) material filled with mineral. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America. Primary attribute of ADDILENE PMD 50306: Scratch Resistant. Typical application of ADDILENE PMD 50306: Automotive |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 66 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 20.0 | MPa | |
| Break | 15.0 | MPa | |
| Tensile Strain (Break) | 20 | % | ISO 527-2 |
| Flexural Modulus | 2000 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 15 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | ISO 179/1eU | |
| Notched Izod Impact Strength | 14 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 58.0 | °C | ISO 75-2/Af |
| Vicat Softening Temperature | 146 | °C | ISO 306/A50 |
| Melting Temperature (DSC) | 165 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+13 | ohms·cm | IEC 60093 |
| Comparative Tracking Index (Solution A) | 600 | V | IEC 60112 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Metocene MF650Y | LyondellBasell Industries | PP Homopolymer | Metocene |
| HiPrene® MT42HS | GS Caltex | PP, Unspecified | HiPrene® |
| Idealis 500 | Braskem | HMWPE | Idealis |
| Paxon™ BA50-120 | ExxonMobil Chemical | HDPE, MMW | Paxon™ |
| Plaslube® PA6/6,6 L N | Techmer Engineered Solutions | Nylon 66/6 | Plaslube® |
