Order Products : sales@su-jiao.com

LTM® 45 series

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Cytec Industries Inc.
Trademark:	LTM®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BOFHtc_LTM-45-series.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
LTM® 45 series prepregs consists of a range of low temperature curing epoxy matrix resins giving prepregs with elevated end use temperature performance and good hot and wet strength retention. The range encompasses LTM45 with an initial cure temperature of 50°C (122°F). All the resins within the range exhibit similar thermo-mechanical performance when fully cured. LTM45 and LTM45-EL are the most commonly selected prepreg resin systems from this range. For improved oven vacuum processing LTM45-1 is recommended as an alternative to LTM45EL when used with carbon fabrics up to 285g/m². LTM45- 1 provides improved toughness and compression properties, please refer to PDS1082.

Message

LTM® 45 series prepregs consists of a range of low temperature curing epoxy matrix resins giving prepregs with elevated end use temperature performance and good hot and wet strength retention. The range encompasses LTM45 with an initial cure temperature of 50°C (122°F). All the resins within the range exhibit similar thermo-mechanical performance when fully cured.

LTM45 and LTM45-EL are the most commonly selected prepreg resin systems from this range.

For improved oven vacuum processing LTM45-1 is recommended as an alternative to LTM45EL when used with carbon fabrics up to 285g/m². LTM45- 1 provides improved toughness and compression properties, please refer to PDS1082.

General Information
Filler / Reinforcement	Aramid Fiber Carbon Fiber Glass Fiber
Features	Autoclavable Fast Cure Good Strength Heat Cure High Heat Resistance High Temperature Strength
Forms	4x4 Twill Prepreg
Processing Method	Vacuum Forming

Physical	Nominal Value	Unit
Specific Gravity ¹	1.20 to 1.21	g/cm³

Thermal	Nominal Value	Unit
Glass Transition Temperature
-- ²	65.0	°C
-- ³	180	°C

Note Message
1 .	Cured resin
2 .	TMA, LTM45 24 hours at 50°C (122°F)
3 .	TMA, 24 hours at 50°C (122°F) + 2 hours at 180°C (356°F)

Resin Grade	Manufacturer	Category	Trademark
Zetpol® PBZ123	Zeon Corporation	PVC+NBR	Zetpol®
Celanex® 1400A	Celanese Corporation	PBT	Celanex®
Formolene® 5143H	Formosa Plastics Corporation, U.S.A.	PP Homopolymer	Formolene®
HiFill® PA6/6 IM L UV	Techmer Engineered Solutions	Nylon 66	HiFill®
PETLIN LD N109X	PETLIN (MALAYSIA) SDN BHD	LDPE	PETLIN