Order Products : sales@su-jiao.com
LubriOne™ NN-000/10T
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | PolyOne Corporation |
| Trademark: | LubriOne™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BOAWko_LubriOne-NN-000-10T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LubriOne™ Lubricated and Wear-Resistant Compounds have been specifically formulated to be self-lubricating materials, offering low coefficient of friction and improved wear resistance properties. LubriOne compounds have been demonstrated to reduce friction, noise, vibration, heat buildup and improve product durability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 to 1.5 | % | ASTM D955 |
| Water Absorption (24 hr, 3.18 mm) | 1.0 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2960 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 74.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 3.0 to 6.0 | % | ASTM D638 |
| Flexural Modulus | 2740 | MPa | ASTM D790 |
| Flexural Strength | 82.7 | MPa | ASTM D790 |
| Coefficient of Friction | ASTM D1894 | ||
| vs. Steel - Dynamic | 0.45 | ||
| vs. Steel - Static | 0.27 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Injection Molded) | 40 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm | 232 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm | 82.2 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 277 to 304 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 5.1 mm/min |
| 2 . | Type I, 5.1 mm/min |
| 3 . | Type I, 5.1 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Multiuse Leostomer® LE-3170N | Riken Technos Corp. | TPU, Unspecified | Multiuse Leostomer® |
| NuSil R1-2145 | NuSil Technology | Silicone | NuSil |
| EPO-TEK® 930-1 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Haysite SMC 46000 | Haysite Reinforced Plastics | Polyester, TS | Haysite SMC |
| INELEC PEEKCF30HF | Infinity LTL Engineered Compounds | PEEK | INELEC |
