Order Products : sales@su-jiao.com
Jam PE 12X01
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BNGUuG_Jam-PE-12X01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 12X01 is a Linear Low Density Polyethylene product. It is available in Africa & Middle East. Typical application: Film. Primary characteristic: butene comonomer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.912 to 0.916 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.95 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm, Blown Film | 10.8 | MPa | |
| TD : Yield, 25 µm, Blown Film | 10.8 | MPa | |
| MD : Break, 25 µm, Blown Film | 30.5 | MPa | |
| TD : Break, 25 µm, Blown Film | 37.5 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm, Blown Film | 770 | % | |
| TD : Break, 25 µm, Blown Film | 680 | % | |
| Dart Drop Impact (25 µm, Blown Film) | 120 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm, Blown Film | 400 | g | |
| TD : 25 µm, Blown Film | 180 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.0 µm, Blown Film) | 20 | ASTM D1790 | |
| Haze (25.0 µm, Blown Film) | 40 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unichem 9904-03 | Colorite Polymers | PVC, Unspecified | Unichem |
| Durethan® DP AKV 50 HR H2.0 901510 | LANXESS GmbH | Nylon 66 | Durethan® |
| Eltex® TUB220-RT | INEOS Olefins & Polymers Europe | PE, Unspecified | Eltex® |
| HiFill® PA6/6 0146 A | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| PALSTYROL® R S 12 | pal plast GmbH | PS (GPPS) | PALSTYROL® |
