Order Products : sales@su-jiao.com
Fluoroplex I 10 - GML
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | UNIFLON |
| Trademark: | Fluoroplex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BLH6g0_Fluoroplex-I-10---GML.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Fluoroplex I 10-GML is a polytetrafluoroethylene (PTFE) product that contains a 10% polyimide filler. It can be processed by sintering or injection molding and is available in North America or Latin America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.97 - 2.05 | g/cm³ | Internal method |
| Contractility- Sintering | 2.0 - 3.0 | % | Internal method |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Sintering Temperature - Maximum | 360 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 59 - 64 | Internal method |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 22.0 | MPa | Internal method |
| Tensile Elongation (Break) | 180 | % | Internal method |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Code: 010034901 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 21.0 - 25.0 | °C | |
| Injection Pressure | 34.3 - 44.1 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Aquivion® E98-09S | Solvay Specialty Polymers | PFSA | Aquivion® |
| Cri-Line LT-718 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| Estane® 58142 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estane® |
| HiFill® PA6/6 0177 B | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LUVOCOM庐 6-8438-1 | Lehmann & Voss & Co. | Nylon 12 | LUVOCOM® |
