Order Products : sales@su-jiao.com
RTP 6003-75A MD NATURAL
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BGor6W_RTP-6003-75A-MD-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ISO 10993 Tested |
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.3 | % | ASTM D955 |
| Moisture Content | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel Strength 1 | |||
| PC/PBT | > 6.1 | kN/m | |
| PC/PMMA | > 6.1 | kN/m |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain, 3.18mm 2 | 3.10 | MPa | ASTM D412 |
| 100% strain, 3.18mm 3 | 3.45 | MPa | ASTM D412 |
| 300% strain, 3.18mm 4 | 4.83 | MPa | ASTM D412 |
| Tensile Strength 5(Break, 3.20 mm) | 6.21 | MPa | ASTM D412 |
| Tensile Elongation 6(Break) | 850 | % | ASTM D412 |
| Tear Strength 7 | 43.8 | kN/m | ASTM D624 |
| Compression Set 8 | ASTM D395B | ||
| 23°C, 22 hr | 23 | % | ASTM D395B |
| 70°C, 22 hr | 65 | % | ASTM D395B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, ** Values per RTP Company testing.) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 193 - 238 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | 90°, 20 in/min, RTP 55, Overmold Failure |
| 2 . | C mold, 510mm/min |
| 3 . | Mouth die C, 510mm/min |
| 4 . | C mold, 510mm/min |
| 5 . | C mold, 500 mm/min |
| 6 . | Mouth die C, 500 mm/min |
| 7 . | C mould |
| 8 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® AI12WT6430 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| NuSil CV-1142 | NuSil Technology | Silicone | NuSil |
| NORYL™ RN0611 resin | SABIC Innovative Plastics Europe | PPE+PS | NORYL™ |
| PermaStat® 600 Nat/Clear | RTP Company | ABS | PermaStat® |
| Pibiflex® L6060 NAT | SO.F.TER. SPA | TPC-ET | Pibiflex® |
