Order Products : sales@su-jiao.com

TOTAL Polystyrene Crystal CX5243

Category:	PS (GPPS) , General Purpose Polystyrene
Manufacturer:	TOTAL Refining & Chemicals
Trademark:	TOTAL Polystyrene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BGlSaA_TOTAL-Polystyrene-Crystal-CX5243.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TOTAL Petrochemicals CX5243 is a very high flow, high heat crystal polystyrene. The very low viscosity of this grade combined with its high heat resistance makes it particularly suitable for the production of extrusion foam board (XPS) with blowing agents such as CO 2 and HFC. It is also ideal for use as a masterbatch carrier. Applications Insulation foam board Masterbatch carrier Modifier for thermoplastic elastomers and rubbers General Information This material complies with FDA requirements as described in 21 CFR §177.1640. USP Class VI Material Safety Data Sheets are available to help customers satisfy their safety needs.

Message

TOTAL Petrochemicals CX5243 is a very high flow, high heat crystal polystyrene. The very low viscosity of this grade combined with its high heat resistance makes it particularly suitable for the production of extrusion foam board (XPS) with blowing agents such as CO 2 and HFC. It is also ideal for use as a masterbatch carrier.

Applications

Insulation foam board

Masterbatch carrier

Modifier for thermoplastic elastomers and rubbers

General Information

This material complies with FDA requirements as described in 21 CFR §177.1640.

USP Class VI

Material Safety Data Sheets are available to help customers satisfy their safety needs.

General Information
Features	High Flow High Heat Resistance Highly Crystalline Low Viscosity
Uses	Foam Masterbatch
Agency Ratings	FDA 21 CFR 177.1640 USP Class VI
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.04	g/cm³
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	23	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.40 to 0.70	%	ASTM D955
Moisture	< 0.10	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2960	MPa	ASTM D638
Tensile Strength	27.6	MPa	ASTM D638
Flexural Modulus	3310	MPa	ASTM D790
Flexural Strength	46.2	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Annealed)	95.6	°C	ASTM D648
Vicat Softening Temperature	106	°C	ASTM D1525

Resin Grade	Manufacturer	Category	Trademark
Softell TKG 259N	LyondellBasell Industries	Polyolefin, Unspecified	Softell
Fenochem C 4700	Chemiplastica, Inc.	Phenolic	Fenochem
Forprene® 6NM001D50	SO.F.TER. SPA	TPV	Forprene®
HYBRAR™ 5125	Kuraray Co., Ltd.	TPE	HYBRAR™
Lutene® LB7500	LG Chem Ltd.	LDPE	Lutene®