Order Products : sales@su-jiao.com
BCC Resins BC 8165
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | BCC Products Inc. |
| Trademark: | BCC Resins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BGK7V0_BCC-Resins-BC-8165.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BC 8165 is a low viscosity, rapid setting, rigid urethane compound. Similar to BC 8163, however exhibits an 8 to 10 minute working time. This system will cure quickly to a hard, tough, impact resistant casting. BC 8165 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. BC 8165 is recommended for thin wall model and prototype applications where a "thermoplastic feel" is desired. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.4 | % | ASTM D638 |
| Flexural Modulus | 1450 | MPa | ASTM D790 |
| Flexural Strength (Break) | 52.7 | MPa | ASTM D790 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 80, Mix Ratio by Volume: 87 | ||
| Resin | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Pot Life (24°C) | 8.0 to 10 | min | |
| Thermoset Mix Viscosity (24°C) | 230 | cP | ASTM D2393 |
| Demold Time (25°C) | 60 to 120 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® ET3227 | Covestro - Polycarbonates | PC | Makrolon® |
| RTP 200 B | RTP Company | Nylon 610 | RTP |
| POLYNIL® P240 L | Nilit Plastics | Nylon 66 | POLYNIL® |
| Solanyl® BP blend 40R | Rodenburg Biopolymers B.V. | Biodeg Polymers | Solanyl® BP blend |
| ASTALAC™ ABS LG150 | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
