Order Products : sales@su-jiao.com
Quadrant EPP CESTIFLAME PE-UHMW
| Category: | UHMWPE , Ultra High Molecular Weight Polyethylene |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Quadrant EPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BE512o_Quadrant-EPP-CESTIFLAME-PE-UHMW.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Quadrant EPP CESTIFLAME PE-UHMW is an Ultra High Molecular Weight Polyethylene product. It is available in Europe. Typical application: Industrial Applications. Characteristics include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.01 | g/cm³ | ISO 1183 |
| Water Absorption (Saturation, 23°C, 1.00 mm) | 0.40 | % | ISO 62 |
| Molecular Weight | 4500000 | g/mol |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Service Temperature - Minimum | -100 | °C |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Relative Weight Loss | Internal Method | ||
| -- 1 | 145 | ||
| -- 2 | 90.0 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore D, 3 sec | 63 | ||
| Shore D, 15 sec | 61 | ||
| Ball Indentation Hardness | 40.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1000 | MPa | ISO 527-2/1B/1 |
| Tensile Stress (Yield) | 18.0 | MPa | ISO 527-2/1B/50 |
| Tensile Strain (Yield) | 15 | % | ISO 527-2/1B/50 |
| Nominal Tensile Strain at Break | > 50 | % | ISO 527-2/1B/50 |
| Compressive Stress | ISO 604/1 | ||
| 5% Strain | 16.0 | MPa | |
| 2% Strain | 10.5 | MPa | |
| 1% Strain | 6.50 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (Partial Break) | 65 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | |||
| -- 3 | 80.0 | °C | |
| -- 4 | 120 | °C | |
| Melting Temperature | 130 to 135 | °C | ISO 11357-3 |
| CLTE - Flow (23 to 100°C) | 1.8E-4 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | < 1.0E+8 | ohms | IEC 60093 |
| Volume Resistivity | < 1.0E+8 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (10.0 mm) | V-0 | UL 94 | |
| Oxygen Index | > 20 | % | ISO 4589-2 |
| Note Message | |
|---|---|
| 1 . | Wear test in sand/water slurry |
| 2 . | Wear test on plastics pin on rotating steel disk-tribo system |
| 3 . | 20000 hrs |
| 4 . | Short periods |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOTAL Polyethylene Lotrène® Q2018 C | TOTAL Refining & Chemicals | LLDPE | TOTAL Polyethylene |
| Borcoat™ BB127E | Borealis AG | PP, Unspecified | Borcoat™ |
| Fenochem T 4800 | Chemiplastica, Inc. | Phenolic | Fenochem |
| Elastron® G P.G401.A60.N | Elastron USA, Inc. | SEBS | Elastron® G |
| Huafon JF-W-3100 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
