Order Products : sales@su-jiao.com
Marlex® C100
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BDyzYv_Marlex-C100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® C100 is a Linear Low Density Polyethylene material. It is available in Latin America or North America for blow molding. Important attributes of Marlex® C100 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| 10% Igepal, Compression Molded, F50 | > 1000 | hr | ASTM D1693A |
| 100% Igepal, Compression Molded, F50 | > 1000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 600 | % | ASTM D638 |
| Flexural Modulus - Tangent 3(Compression Molded) | 310 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 283 D TFE 15 SI 2 | RTP Company | Nylon 612 | RTP |
| Hylac® GP27 | Ravago Manufacturing Americas, LLC | ABS | Hylac® |
| SCHULAMID® 66 GF 30 FC | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| Sumiliteresin® EX-1101 | SBHPP | Epoxy | Sumiliteresin® |
| NORYL™ WCD841U resin | SABIC Innovative Plastics | PPE+TPE | NORYL™ |
