| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | Saint Gobain Performance Plastics |
| Trademark: | Rulon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BDhlBE_Rulon-XL.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
Rulon® XL is a tan colored material that is best for use against aluminum (including anodized) substrates. Rulon XL exhibits very low wear as compared with other Rulon® grades. Other advantages offered by this unique material are that it combines low deformation under load with exceptionally good chemical resistance. It is compatible with a wide range of mating surfaces, but is not recommended for use with alkalis. Its non-abrasive character enhances the frictional performance to prevent galling of softer mating surfaces. It is the best material for vacuum service. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.97 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 11.7 | MPa | ASTM D4894 |
| Tensile Elongation (Break) | 160 | % | ASTM D4894 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® ABS 313HM | Guangdong Silver Age Sci & Tech. Co., Ltd | ABS | SILVER® |
| Spartech Polycom SCR7-7015R | Spartech Polycom | PC | Spartech |
| KYOCERA CT4112 | KYOCERA Chemical Corporation | PI, TS | KYOCERA |
| Isoplast® 101 LGF 60 ETPU | Lubrizol Advanced Materials, Inc. | ETPU | Isoplast® |
| LUVOCOM® 1/GF/30/TF/15/SI/2-2 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |