Order Products : sales@su-jiao.com

NuSil R7-3521-11

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	B9yyPZ_NuSil-R7-3521-11.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Adhesives and Sealants Comment: Solvent Resistance

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Adhesives and Sealants

Comment: Solvent Resistance

General Information
Features	Electrically Conductive Fuel Resistant Solvent Resistant
Uses	Adhesives Aircraft Applications Electrical/Electronic Applications Sealants

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Grey
Density	1.27	g/cm³
Curing Time (23°C)	48	hr
Pot Life	60	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	30
Tensile Strength	3.45	MPa
Tensile Elongation at Break	260	%
Tear Strength	6.13	kN/m

Resin Grade	Manufacturer	Category	Trademark
MAXAMID™ PA612-BK10	Pier One Polymers, Inc.	Nylon 6	MAXAMID™
Matrixx 81N7004	The Matrixx Group, Inc.	PET	Matrixx
Comai 105-4 BL	Comai Ltda	PP Homopolymer	Comai
EBAC® SP1802	Westlake Chemical Corporation	EnBA	EBAC®
INCOLOR INX-PSB-06134 BK001	Infinity LTL Engineered Compounds	SBC	INCOLOR