Order Products : sales@su-jiao.com
CERTENE™ SIM-120
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B7tiho_CERTENE-SIM-120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SIM-120 is a certified prime grade developed for INJECTION MOLDING applications requiring good strength coupled with good flexibility. SIM-120 offers easy-flow processability, excellent uniformity and consistency of melt viscosity, and very good Impact resistance of molded articles. SIM-120 applications include industrial parts, thin walled packaging, coat-hangers, closures, flower pots, bathroom accessories, appliance components, scale models, toys, audio and video cassette shells, toys, furniture components, and blends with Crystal Polystyrene for mechanical properties improvement. SIM-120 complies with FDA regulation 21CFR 177.1640 and with most international regulations concerning the use of Polystyrene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(R-Scale) | 55 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2000 | MPa | ASTM D638 |
| Tensile Strength 2(Yield, Injection Molded) | 15.9 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 50 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Injection Molded) | 2050 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 91 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 73.0 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 96.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | Injection molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Milastomer™ C700BM | Mitsui Chemicals America, Inc. | TPV | Milastomer™ |
| Styrilic Grade 2020 | Deltech Polymers Corporation | Acrylic (SMMA) | Styrilic |
| EverGlide® SG5920 | Polymer Dynamix | Nylon 46 | EverGlide® |
| Flontech® FT-GL5-M5-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Sylvin 8600-85 Yellow 4173 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
