Order Products : sales@su-jiao.com
FORMULA P ELAN XP 416
| Category: | PP+Styrenic , Polypropylene + Styrenic |
| Manufacturer: | Putsch Kunststoffe GmbH |
| Trademark: | FORMULA P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B6lWEW_FORMULA-P-ELAN-XP-416.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP/.PS-Blend. This material has very good scratch-resistance. This type has the same shrinkage like PP T 20 with a 10% lower density. Low warpage and no wear on mold surface. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.1 - 1.3 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 22.0 | MPa | ISO 527-2 |
| Fracture | 16.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 35 | % | ISO 527-2 |
| Flexural Modulus | 1400 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 42.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -20°C | 2.5 | kJ/m² | ISO 180 |
| 23°C | 10 | kJ/m² | ISO 180 |
| Aging | Nominal Value | Unit | |
|---|---|---|---|
| Heat Aging (150°C) | 16.7 | day |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 70.0 | °C | ISO 306/B |
| Additional Information |
|---|
| Tensile Strength, ISO 527: 22 MPa |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 230 - 250 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8301-75LG Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| VESTAMID® HTplus M1031 | Evonik Industries AG | PPA | VESTAMID® HTplus |
| Badamid® LB70 GF30 | Bada AG | Nylon 6 | Badamid® |
| LUVOCOM® 20/XCF/35 | Lehmann & Voss & Co. | PPA | LUVOCOM® |
| POLYCASA® XT SBW | Polycasa | Acrylic (PMMA) | POLYCASA® |
