Order Products : sales@su-jiao.com
Integra™ PA12
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | PolySource, LLC |
| Trademark: | Integra™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B4wARO_IntegraPA12.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyamide 12, FDA Food Contact, NSF-61, USP VI rated |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.00 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Transverse flow | 0.80 | -- | % | ISO 294-4 |
| Flow | 0.70 | -- | % | ISO 294-4 |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 3.0 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 1.5 | -- | % | ISO 62 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Ball Indentation Hardness | -- | 90.3 | MPa | ISO 2039-1 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 1600 | -- | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 60.0 | -- | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 6.0 | -- | % | ISO 527-2 |
| Nominal Tensile Strain at Break | > 50 | -- | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 9.0 | 12 | kJ/m² | ISO 179/1eA |
| 23°C | 9.0 | 13 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | No Break | -- | ISO 179/1eU | |
| 23°C | No Break | -- | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 135 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 115 | -- | °C | ISO 75-2/A |
| Continuous Use Temperature | 80.0 - 100 | -- | °C | ISO 2578 |
| Glass Transition Temperature | 155 | -- | °C | ISO 11357-2 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow | 9.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral | 9.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | -- | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+13 | -- | ohms·cm | IEC 60093 |
| Dielectric Strength | 34 | -- | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.6 mm) | HB | -- | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Medalist® MD-150 | Teknor Apex Company | TPE | Medalist® |
| RTP 100.5 | RTP Company | PP, Unspecified | RTP |
| NORYL™ WCD795 resin | SABIC Innovative Plastics Asia Pacific | PPE+TPE | NORYL™ |
| Luran® S 797S | Styrolution | ASA | Luran® S |
| OmniTech™ PBAB GR30 | OMNI Plastics, LLC | ABS+PBT | OmniTech™ |
